![]() Bruce Roberts-Goodson CONTACT BRUCE BY |
Bruce Roberts Yacht Design Official BRUCE ROBERTS WEB SITE - DESIGN OFFICE FOUNDED 1966
|
![]() Gwenda Roberts-Goodson HOME PAGE |
CONSTRUCTION & COMPLETED BOAT PHOTOS ARE INCLUDED IN THE STUDY PLANS ON CD |
ROBERTS 432 - STEEL, ALUMINUM OR FIBERGLASS This design was drawn to replace the earlier Mauritius 43 and Norfolk 43 plans. These earlier designs were first drawn in 1969 and have been some of our most popular designs with over 2,000 examples currently in service throughout the world. There are now over 500 of the latest version Roberts 432 either already in service or being completed world wide. We have now added a STEEL or ALUMINUM kit or cutting files for this boat and you can see details of those on this link ... see VOYAGER 432 This is a design for long keel fans and you can build the Roberts 432 in FIBREGLASS or in steel or aluminum with either a multi chine hull or a radius chine hull configuration. The regular aft cockpit version, or the centre cockpit/pilot house/poop stern version, offer several different accommodation possibilities which you could customize to build the long range cruising yacht to best suit your needs. |
| L.O.D. | 13.40 m | 43' 11" | |
| L.W.L. | 11.6 m | 38' 0" | |
| BEAM | 4.10 m | 13' 6" | |
| DRAFT | 1.60 m | 5' 3" | |
| DRAFT | 1.80 m | 6' 0" | |
| DISPL. | FIBREGLASS or Aluminum | 11,793 kg | 26,000 lb |
| Steel | 13,539 kg | 29,850 lb | |
| BALLAST. | 4,467 kg | 9,000 lb | |
![]() |
Roberts 432 Version A Plans & Full Size frame patterns for steel or fiberglass. I remember when the builder of this boat contacted me a few years ago - this attractive R432 is currently cruising in the Mediterranean
STUDY PLAN
PACKAGES ON CD GIVE ACCESS TO MANY step by step BOAT
CONSTRUCTION
PHOTOS + PHOTOS OF COMPLETED BOATS ETC.
|
![]()
|
Roberts 432 Version A Plans & Full Size frame patterns for steel or fiberglass. Here we see the popular and well proven long keel hull that is a feature of this design.
The accomodation plan can be varied to suit
your requirements. |
![]() |
Roberts 432 Version A Plans & Full Size frame patterns for steel or fiberglass. FROM - Mature customer - moving from sail to one of our Trawler Yachts. I built Roberts-43 sailboat from your plans in 1977-81 in Alaska and sailed it approximately 10,000 nm before selling it. Wonderful sea-boat...admired everywhere....C-Flex with balsa cored decks and cabin. Older now and into riding on the inside of the boat here in the Pacific Northwest. David K. Parker |
![]() |
Roberts 432 Version A Plans & Full Size frame patterns for steel or fiberglass. Frank Foster writes....I noticed your post to the "Justice" web site. Thought I would mention that I was the builder of the "Justice". We met once at the Newport Boat Show while she was under construction. She is mostly Roberts 432 with an "R-45" layout. Regards Frank |
![]() |
Roberts 432 Version A Plans & Full Size frame patterns for steel or fiberglass. This attractive interior is typical of many Roberts designs that are built by their owners.
|
![]() |
Roberts 432 Version A Plans & Full Size frame patterns for steel or fiberglass. Some builders go to great lengths to customize their boat - this dinette table is typical of some of these owner / builder features built into these boats.
|
![]() |
Roberts 432 Version A Plans & Full Size frame patterns for steel or fiberglass. Sailed by Kjell and Berit from their home in Sweden, this boat showed up in the Burnett River to clear for Australia after spending the summer in Australian waters. Their plans are to return home via the Suez Canal, alter the accommodation area below, fit some new sails and take off again. Another happy sailing couple fulfilling their dreams |
|
|
This Roberts 43 sailed around the world
from the UK. LATER : 2006 Hi Bruce, I was browsing through your website looking to see whether you designed the 43ft "Fisher/trawler" motor sailer we are about to have a look at when this jumped out at me! Thought you would like an update on Suleika, the yacht in the photo. She has just completed her second successful circumnavigation, 7 or 8 years I think, with her "new" owners, the folk who bought her from us in 1995. We are now based in NZ and for several months Suleika was based in an adjacent marina berth, quite a coincidence. I recall our encounter at the Beaulieu Boat Jumble, Hampshire England in 1995, hope you are doing well, best wishes Sally Gillet. |
![]() |
LEFT:
This Roberts 43 Pilot House version was built in about
1970 and is still going strong. I owned the boat for 4 years and sold her in 94,after re-naming her "Pavanne" She has been sold 3 times since and I saw her yesterday at Fremantle Sailing Club. I'm tempted to buy her back . However and more to the point, she's stylish and the design looks as good to-day as it did when it was drawn probably 30 years ago. Good on you Bruce , you're a legend. Kind Regards, Mike Capelle |
![]() |
Roberts 432 Version B Plans & Full Size frame patterns for steel or fiberglass. This Pilot House R432 can be rigged as a cutter, sloop or ketch as well as a variety of other sail plans. The study plans on CD have all this information in considerable detail. |
|
|
Roberts 432 Version B Plans & Full Size frame patterns for steel or fiberglass. Here we see the popular and well proven long keel hull that is a feature of this design.
The accomodation plan can be varied to suit your requirements - other version are shown in the Study plans on CD package. |
![]() |
Roberts 432 Version B Plans & Full Size frame patterns for steel or fiberglass. Comfortable pilot and navigation seating is built in to this Roberts 432. |
![]() |
Roberts 432 Version B Plans & Full Size frame patterns for steel or fiberglass. This diesel heating stove is well protected and represents well thought out installation.
|
Hi Bruce, I love my M43 ketch and I wish the technology had been around 25 years ago to easily build a steel hull. I built it alone on shoestring in 12 years. Then I had to teach myself to sail. It is an easy boat to handle and given to no sudden or nasty tricks. A most forgiving design. Often on the bay , I meet other boats of the same size that are heeled strongly while the M43 remains adamantly upright. I'm making the same speed so I guess I'm doing something right. The Mauritius 43is very forgiving and very stable. Only for a person who never skippered anything but a canoe God was she massive! regards RF Hello Bruce. Just a short message
regarding one of your completed designs. My father, Charles Bonds, built a Norfolk
43 centre cockpit, flush deck, ketch rigged sailboat named KANGATOO from your designs in
our backyard in Mississauga, a suburb of Toronto (Canada). He started building it
approximately in 1981 and launched it in 1989. He set sail for Florida and retired
there. Unfortunately he passed away this year but he had many years of live aboard
enjoyment. The boat is up for sale now, but I thought you might like to see a couple
of pictures. Kelly Bonds |
| Bruce: We have built your Offshore 44 design in steel are very happy with her. She is a wonderful, comfortable and well sailing boat. We want to enter a couple of low key races this year with her before we go off cruising. One of the questions on the handicap form is the year that she was designed. What year was she designed anyway? We started construction in 1985, launched in 2002 and have been enjoying her ever since. For your enjoyment I have attached a photo of her taken last September in Tamales Bay, about 50 miles north of San Francisco. Thanks for such a great boat. David and Rose Eberhard s/v Valkyrie |
EMAIL
- ORDERS -
HOME / INDEX PAGE
SAILBOAT
DESIGNS
POWERBOAT DESIGNS